Category: Space Communications & Navigation Program

Auto Added by WPeMatico

Posted on

NASA Search and Rescue Technology Saves Explorers, Enables Exploration

Source: NASA

In 2023, NASA-developed search and rescue technologies aided first responders in locating and saving 350 lives in the United States. Now, NASA is incorporating that same technology in astronaut missions.

NASA provides technical expertise to the international satellite-aided search and rescue effort known as Cospas-Sarsat. This technical expertise has enabled the development of multiple emergency location beacon types, which explorers can use when in need.
Should an explorer become distressed or lost, they can activate the 406 MHz frequency beacon. The beacon sends a distress signal to a GPS (Global Positioning System) satellite in space, which then relays the signal location to the Cospas-Sarsat network. With the precise position of the beacon, the network can alert first responders anywhere in the world and initiate the rescue.
These beacons provide explorers with a sense of safety as they venture on land, air, and sea. There are three types of beacons available for users: personal locator beacons, used by hikers and other land explorers; emergency position indicating radio beacons, for boaters and sailors; and emergency locator transmitters for aircraft pilots.
In 2023, 51 rescues were made for activated personal locator beacons; 255 for emergency position indicating radio beacons; and 44 for emergency locator transmitters, according to the National Oceanic and Atmospheric Administration (NOAA).
NASA’s Search and Rescue office has a long legacy of Earth-based beacon development and is now applying that expertise to support NASA’s Artemis campaign. For Artemis I, beacons placed on the Orion spacecraft located the uncrewed capsule as it splashed down in the Pacific Ocean after its 1.4-million-mile journey around the Moon and back.
Going further, for Artemis II, NASA’s first crewed mission under Artemis, the agency is including second-generation beacons called ANGEL (Advanced Next-Generation Emergency Locators) on the astronauts’ life preservers and installing another location beacon onto the Orion spacecraft capsule. In the event NASA astronauts Reid Wiseman, Victor Glover, Christina Koch, and Jeremy Hansen of CSA (Canadian Space Agency) may need to exit from Orion without the assistance of recovery personnel, NASA will be able to locate them immediately using the ANGEL beacon locations.
In July 2023, as part of the at-sea recovery testing for Artemis missions, search and rescue team members were aboard the USS John P. Murtha to validate ANGEL and the newly developed SAINT (SAR Intelligent Terminal) application, which tracks the beacons’ locations in real-time. The team is now readying itself for the next at-sea test of Artemis recovery procedures in February.
The Search and Rescue office is a part of the SCaN (Space Communications and Navigation) program office and is essential for NASA’s endeavors to the Moon and Mars. The office has a unique portfolio that advances NASA’s exploration capabilities while enabling the life-saving technology used by Earth-based adventurers.
NOAA manages the U.S. network region for Cospas-Sarsat, which relies on flight and ground technologies originally developed at NASA’s Goddard Space Flight Center in Greenbelt, Maryland.
The SCaN program at NASA Headquarters in Washington provides strategic oversight to the Search and Rescue office. U.S. region rescue efforts are led by the U.S. Coast Guard, U.S. Air Force, and many other local rescue authorities.
By Kendall MurphyNASA’s Goddard Space Flight Center, Greenbelt, Md.

Posted on

Wideband Technology

Source: NASA

As NASA’s Tracking and Data Relay Satellite (TDRS) constellation approaches retirement, partnerships with commercial industry will play a critical role in the development of future space communications and navigation architecture. Over the next decade, NASA missions will transition towards adopting commercial space-based relay services to fulfil their near-Earth communications needs.
The Space Communications and Navigation (SCaN) program is working to ensure that future missions will continue to have reliable, resilient space and ground communications and navigation infrastructure. Wideband polylingual terminals could become a key technology supporting that infrastructure, by providing seamless roaming capabilities that could allow missions to receive communication signals from multiple SATCOM service providers through the use of software defined radios (SDR). Developed over the last decade, SDR technology enables waveform change in-orbit, allowing for the adoption of new and evolving commercial services by missions as they become available.

The goal of NASA’s Wideband User Terminal project is to provide interoperability between government and commercial owned networks for near-Earth services in the near-term by leveraging traditional NASA assets with new commercial infrastructure.  
Cellphone providers adopted roaming technology long ago, allowing devices to jump from network to network without interrupting service. Wideband terminals aim to enable similar roaming capabilities for space communications applications, a capability that has not been available to missions in the past.  
Wideband interoperability technology was developed and tested at NASA’s Glenn Research Center in Cleveland, Ohio, where the first successful test of roaming between multiple network providers was conducted in 2021. 

Interoperability between industry and government owned network providers could play a key role in NASA’s transition towards commercialization. NASA has relied on the TDRS system to provide near-constant communication links between the ground and satellites in low-Earth orbit for almost 40 years, but the infrastructure was not originally designed for interoperability between networks.  
SCaN is developing wideband technology to help the mission user community transition towards relying on commercial providers, by providing the safeguard option of connecting to the reliable TDRS network while private industry continue to develop and mature their space-based services over the next decade. 
There are numerous potential benefits of providing missions with interoperability between NASA’s legacy TDRS networks and new commercial satcom services, including reducing the risk of data loss and communication delays. Providing missions with a selection of network providers can also help avoid vendor lock-in and keep mission execution on schedule when unexpected circumstances arise.

NASA’s Wideband Terminal Project is collaborating with Johns Hopkins University Applied Physics Laboratory to test the prototype Polylingual Experimental Terminal (PExT). Mission objectives include demonstrating interoperability through contact and link management, and forward and return link data flow while roaming between NASA’s TDRS network and three commercial relay networks. The PExT Wideband Terminal will be the first flight demonstration of roaming across government and commercial networks from a single terminal. 
PExT will be integrated with a York Space Systems S-class Bus and launched on the SpaceX Falcon 9 Transporter-11 flight, currently planned for June 2024.  
The terminal will demonstrate various mission scenarios during its six-month testing period, including: 
self-pointing capabilities 
long-term schedule execution  
intra-/inter-network link handoff 
waveform adaptation and reloading 
command stack protection (crypto) 
link fault recovery 
The Wideband Project is currently providing opportunities for the mission user community to take part in extended operation experiments using Wideband technology. Please contact Wideband Technology Lead marie.t.piasecki@nasa.gov for more information. 

Wide frequency covers the entire range of commercial and government Ka-Band allocations, including 17.7 GHz to 23.55 GHz Forward, and 27 GHz to 31 GHz Return   
Initial data rates reach up to 90 Mbps Forward and 375 Mbps Return. Future data rates are projected up to 490 Mbps Forward and 1 Gbps Return 
Supports both NASA and commercial waveforms – including DVB-S2 and CCSDS TDRSS  
The body-mounted 0.6-meter antennas are scalable for other missions 
Effective Isotropic Radiated Power (EIRP) 46.21 dBW minimum 
Gain to Noise G/T ration approximately 6dB/K 

Posted on

NASA Funds Laser Communications Tech with Small Business

Source: NASA

NASA is working with private industry partners and small businesses under Artemis to produce scalable, affordable, and advanced laser communications systems that could enable greater exploration and discovery beyond Earth for the benefit of all.
Laser, or optical, communications provide missions with increased data rates – meaning that missions using laser technology can send and receive more information in a single transmission compared with those using traditional radio waves. When a spacecraft uses laser communications to send information, infrared light packs the data into tighter waves so ground stations on Earth can receive more data at once. Laser communications systems can provide 10 to 100 times higher data rates than the radio systems used by space missions today.
As science instruments evolve to capture high-definition data, missions will need expedited ways to transmit information to Earth. It would take roughly nine weeks to transmit a complete map of Mars back to Earth with current radio frequency systems. With lasers, it would only take about nine days.
Advancing Laser Technologies
Through a small business collaboration, NASA’s Space Communications and Navigation (SCaN) Program funded the successful development of a new piece of laser technology. Developed by Fibertek Inc., the Basestation Optical Laser Terminal is a four-channel laser unit that could enable the transmission of high-power communications to the Moon during the Artemis II flight test. Artemis II will send a crew of four astronauts on a journey around the Moon and bring them back safely, paving the way for future long-term human exploration missions to the lunar surface, and eventually Mars.
Known as the Orion Artemis II Optical Communications System, the Artemis II demonstration will use laser communications to transmit high-resolution images and video of the lunar region to two ground stations. One of the two ground stations, located at NASA’s Goddard Space Flight Center in Greenbelt, Maryland, is the Low-Cost Optical Terminal.

In September 2023, Fibertek’s technology was integrated into NASA’s low-cost terminal ground station and successfully tested. NASA’s Low-Cost Optical Terminal is a telescope around 27 inches in diameter that is made of mostly commercial off-the-shelf parts. Using commercial components is more cost-effective than developing custom hardware and can also make an architecture scalable for replication. The Low-Cost Optical Terminal will serve as a template for future ground stations.
“Laser communications, focusing on direct-to-Earth links, is a maturing technology that is essential for NASA to meet its future communications capacity and navigation needs. As we mature any technology, establishing and supporting a healthy domestic supply chain is vital,” said Dr. Jason Mitchell, director of SCaN’s Advanced Communications and Navigation Technologies Division at NASA Headquarters in Washington. “American small businesses play a key role in that chain, and our engagement with Fibertek Inc. is an example of this process.”
NASA’s Glenn Research Center in Cleveland and NASA’s Small Business Innovation Research Program funded the development of the Basestation Optical Laser Terminal. Through America’s Seed Fund, NASA provides small businesses with early-stage federal funding for innovative technologies to advance agency missions.
“NASA’s investment in the development of this technology is a win-win-win for the agency and Fibertek, as well as any other future system integrators or developers that want to use laser communications technology,” said Nang Pham, SCaN small business project manager at NASA Glenn.
As NASA prepares to send human’s back to the Moon for the first time in 50 years, new laser technologies will enable more efficient laser communications systems, expanding humanity’s knowledge of our Moon and what lies beyond.
For more information on laser communications technology, visit: https://www.nasa.gov/communicating-with-missions/lasercomms/

Posted on

NASA’s Deep Space Network Turns 60 and Prepares for the Future

Source: NASA

The agency’s DSN provides critical communications and navigation services to dozens of space missions, and it’s being modernized to support dozens more.
NASA’s Deep Space Network marks its 60th year on Dec. 24. In continuous operations since 1963, the DSN is what makes it possible for NASA to communicate with spacecraft at or beyond the Moon. The dazzling galactic images captured by the James Webb Space Telescope, the cutting-edge science data being sent back from Mars by the Perseverance rover, and the historic images sent from the far side of the Moon by Artemis I – they all reached Earth via the network’s giant radio dish antennas.
During 2024, these and other historic contributions from the past 60 years will be celebrated by NASA’s Space Communications and Navigation (SCaN) program, which manages and directs the ground-based facilities and services that the DSN provides.
More than 40 missions depend on the network, which is expected to support twice that number in the coming years. That’s why NASA is looking to the future by expanding and modernizing this critical global infrastructure with new dishes, new technologies, and new approaches.
“The DSN is the heart of NASA – it has the vital job of keeping the data flowing between Earth and space,” said Philip Baldwin, acting director of the network services division for SCaN at NASA Headquarters in Washington. “But to support our growing portfolio of robotic missions, and now the human Artemis missions to the Moon, we need to push forward with the next phase of DSN modernization.”
Meeting Added Demands
Managed by NASA’s Jet Propulsion Laboratory in Southern California for SCaN, the DSN allows missions to track, send commands to, and receive scientific data from faraway spacecraft. To ensure those spacecraft can always connect with Earth, the DSN’s 14 antennas are divided between three complexes spaced equally around the world – in Goldstone, California; Canberra, Australia; and Madrid, Spain.
[embedded content]
The Deep Space Network is much more than a deep space messaging service. Learn more about how the DSN carries out radio and gravity science experiments throughout the solar system. Credit: NASA/JPL-CaltechTo make sure the network can maximize coverage between so many missions, schedulers work with DSN team members to secure network support for critical operations. For more efficiency, NASA has also changed how the network is operated: With a protocol called “Follow the Sun,” each complex takes turns running the entire network during their day shift and then hands off control to the next complex at the end of the day in that region – essentially, a global relay race that takes place every 24 hours. The cost savings, in turn, help fund DSN enhancements.
At the same time, NASA has been busy making improvements to increase capacity, from upgrading and adding dishes to developing new technologies that will help support more spacecraft and dramatically increase the amount of data that can be delivered.
One such technology is laser, or optical, communications, which could enable more data to be packed into transmissions. “Laser communications could transform how NASA communicates with faraway space missions,” said Amy Smith, deputy project manager for the DSN at JPL.
After successfully testing the technique in Earth orbit and out to the Moon, NASA is currently using the DSOC (Deep Space Optical Communications) technology demonstration to test laser communications from ever-greater distances. Riding aboard the agency’s Psyche mission, DSOC has already sent video via laser to Earth from 19 million miles (31 million kilometers) away and aims to prove that high-bandwidth data can be sent from as far away as Mars.
“NASA is proving that laser communication is viable, so now we are looking at ways to build optical terminals inside the existing radio antennas,” said Smith. “These hybrid antennas will be able to still transmit and receive radio frequencies but will also support optical frequencies.”

Technological Heritage
New technology is something that NASA and the DSN have embraced from their inception. The network’s roots extend to 1958, when JPL was contracted by the U.S. Army to deploy portable radio tracking stations to receive telemetry of the first successful U.S. satellite, Explorer 1, which JPL built. A few days after Explorer 1’s launch, but before the creation of NASA later that year, JPL was tasked with figuring out what would be needed to create an unprecedented telecommunications network to support future deep space missions, beginning with the early Pioneer missions.
After NASA formed in 1958, JPL’s ground stations were named Deep Space Information Facilities, and they operated largely independently from one another until 1963. That’s when the DSN was officially founded and the ground stations were connected to JPL’s new network control center, which was nearing completion. Called the Space Flight Operations Facility, that building remains the “Center of the Universe” through which data from the DSN’s three global complexes flows.
“We have six decades driving technological innovation, supporting hundreds of missions that have made countless discoveries about our planet and the universe it inhabits,” said Bradford Arnold, deputy director for the Interplanetary Network at JPL. “Our amazing workforce that continues to drive that innovation today forms a steadfast foundation upon which we can build the next 60 years of space exploration and scientific advancement.”
For more information about the DSN, visit:
https://www.nasa.gov/communicating-with-missions/dsn/
News Media Contact
Ian J. O’NeillJet Propulsion Laboratory, Pasadena, Calif.818-354-2649ian.j.oneill@jpl.nasa.gov
2023-187

Posted on

NASA’s Tech Demo Streams First Video From Deep Space via Laser

Source: NASA

The video, featuring a cat named Taters, was sent back from nearly 19 million miles away by NASA’s laser communications demonstration, marking a historic milestone.
NASA’s Deep Space Optical Communications experiment beamed an ultra-high definition streaming video on Dec. 11 from a record-setting 19 million miles away (31 million kilometers, or about 80 times the Earth-Moon distance). The milestone is part of a NASA technology demonstration aimed at streaming very high-bandwidth video and other data from deep space – enabling future human missions beyond Earth orbit.
“This accomplishment underscores our commitment to advancing optical communications as a key element to meeting our future data transmission needs,” said NASA Deputy Administrator Pam Melroy. “Increasing our bandwidth is essential to achieving our future exploration and science goals, and we look forward to the continued advancement of this technology and the transformation of how we communicate during future interplanetary missions.”
The demo transmitted the 15-second test video via a cutting-edge instrument called a flight laser transceiver. The video signal took 101 seconds to reach Earth, sent at the system’s maximum bit rate of 267 megabits per second (Mbps). Capable of sending and receiving near-infrared signals, the instrument beamed an encoded near-infrared laser to the Hale Telescope at Caltech’s Palomar Observatory in San Diego County, California, where it was downloaded. Each frame from the looping video was then sent “live” to NASA’s Jet Propulsion Laboratory in Southern California, where the video was played in real time.
[embedded content]
This 15-second clip shows the first ultra-high-definition video sent via laser from deep space, featuring a cat named Taters chasing a laser with test graphics overlayed. To see a “cheat sheet” explaining the components of the video, click here. Credit: NASA/JPL-CaltechThe laser communications demo, which launched with NASA’s Psyche mission on Oct. 13, is designed to transmit data from deep space at rates 10 to 100 times greater than the state-of-the-art radio frequency systems used by deep space missions today. As Psyche travels to the main asteroid belt between Mars and Jupiter, the technology demonstration will send high-data-rate signals as far out as the Red Planet’s greatest distance from Earth. In doing so, it paves the way for higher-data-rate communications capable of sending complex scientific information, high-definition imagery, and video in support of humanity’s next giant leap: sending humans to Mars.
“One of the goals is to demonstrate the ability to transmit broadband video across millions of miles. Nothing on Psyche generates video data, so we usually send packets of randomly generated test data,” said Bill Klipstein, the tech demo’s project manager at JPL. “But to make this significant event more memorable, we decided to work with designers at JPL to create a fun video, which captures the essence of the demo as part of the Psyche mission.”
Feline Frequency
Uploaded before launch, the short ultra-high definition video features an orange tabby cat named Taters, the pet of a JPL employee, chasing a laser pointer, with overlayed graphics. The graphics illustrate several features from the tech demo, such as Psyche’s orbital path, Palomar’s telescope dome, and technical information about the laser and its data bit rate. Tater’s heart rate, color, and breed are also on display.

“Despite transmitting from millions of miles away, it was able to send the video faster than most broadband internet connections,” said Ryan Rogalin, the project’s receiver electronics lead at JPL. “In fact, after receiving the video at Palomar, it was sent to JPL over the internet, and that connection was slower than the signal coming from deep space. JPL’s DesignLab did an amazing job helping us showcase this technology – everyone loves Taters.”
There’s also a historical link: Beginning in 1928, a small statue of the popular cartoon character Felix the Cat was featured in television test broadcast transmissions. Today, cat videos and memes are some of the most popular content online.
Milestone After Milestone
This latest milestone comes after “first light” was achieved on Nov. 14. Since then, the system has demonstrated faster data downlink speeds and increased pointing accuracy during its weekly checkouts. On the night of Dec. 4, the project demonstrated downlink bit rates of 62.5 Mbps, 100 Mbps, and 267 Mbps, which is comparable to broadband internet download speeds. The team was able to download a total of 1.3 terabits of data during that time. As a comparison, NASA’s Magellan mission to Venus downlinked 1.2 terabits during its entire mission from 1990 to 1994.
“When we achieved first light, we were excited, but also cautious. This is a new technology, and we are experimenting with how it works,” said Ken Andrews, project flight operations lead at JPL. “But now, with the help of our Psyche colleagues, we are getting used to working with the system and can lock onto the spacecraft and ground terminals for longer than we could previously. We are learning something new during each checkout.”
More About the Mission
The Deep Space Optical Communications demonstration is the latest in a series of optical communication demonstrations funded by the Technology Demonstration Missions (TDM) program under NASA’s Space Technology Mission Directorate and supported by NASA’s SCaN (Space Communications and Navigation) program within the agency’s Space Operations Mission Directorate.
The Psyche mission is led by Arizona State University. JPL is responsible for the mission’s overall management, system engineering, integration and test, and mission operations. Psyche is the 14th mission selected as part of NASA’s Discovery Program under the Science Mission Directorate, managed by the agency’s Marshall Space Flight Center in Huntsville, Alabama. NASA’s Launch Services Program, based at the agency’s Kennedy Space Center in Florida, managed the launch service. Maxar Technologies in Palo Alto, California, provided the high-power solar electric propulsion spacecraft chassis
For more information about the laser communications demo, visit:
https://www.jpl.nasa.gov/missions/dsoc

News Media Contact
Ian J. O’NeillJet Propulsion Laboratory, Pasadena, Calif.818-354-2649ian.j.oneill@jpl.nasa.gov
2023-184

Posted on

NASA’s Space Station Laser Comm Terminal Achieves First Link

Source: NASA

A NASA technology experiment on the International Space Station completed its first laser link with an in-orbit laser relay system on Dec. 5, 2023. Together, they complete NASA’s first two-way, end-to-end laser relay system.
NASA’s LCRD (Laser Communications Relay Demonstration) and the new space station demonstration, ILLUMA-T (Integrated LCRD Low Earth Orbit User Modem and Amplifier Terminal), successfully exchanged data for the first time. LCRD and ILLUMA-T are demonstrating how a user mission, in this case the space station, can benefit from a laser communications relay located in geosynchronous orbit.

Laser communications, also known known as optical communications, uses infrared light rather than traditional radio waves to send and receive signals. The tighter wavelength of infrared light allows spacecraft to pack more data into each transmission. Using laser communications greatly increases the efficiency of data transfer and can lead to a faster pace of scientific discoveries.

On Nov. 9, NASA’s SpaceX 29th commercial resupply services mission launched cargo and new science experiments, including ILLUMA-T, to the space station. Following its arrival, the payload was installed onto the station’s Japanese Experiment Module-Exposed Facility.

ILLUMA-T and LCRD are a part of the NASA Space Communications and Navigation (SCaN) program’s effort to demonstrate how laser communications technologies can significantly benefit science and exploration missions.
“ILLUMA-T’s first link with LCRD – known as first light – is the latest demonstration proving that laser communications is the future.” said Dr. Jason Mitchell, director of SCaN’s Advanced Communications and Navigation Technology division. “Laser communications will not only return more data from science missions, but could serve as NASA’s critical, two-way link to keep astronauts connected to Earth as they explore the Moon, Mars, and beyond.”

Shortly after space station installation, operation engineers began conducting on-orbit testing to ensure the ILLUMA-T payload operated nominally. Now, it is communicating with LCRD, a relay launched in 2021 that has conducted over 300 experiment configurations to help NASA refine laser communications technologies. LCRD and ILLUMA-T are exchanging data at 1.2 gigabits-per-second.
“We have demonstrated that we can overcome the technical challenges for successful space communications using laser communications. We are now performing operational demonstrations and experiments that will allow us to optimize our infusion of proven technology into our missions to maximize our exploration and science,” said David Israel, a NASA space communications and navigation architect.

The LCRD experiments are conducted with industry, academia, and other government agencies. ILLUMA-T is now LCRD’s first in-space user experiment. NASA is still accepting experiments to work with LCRD. Interested parties should contact lcrd-experiments@nasa.onmicrosoft.com for more information.
ILLUMA-T is funded by NASA’s Space Communications and Navigation (SCaN) program at NASA Headquarters in Washington. The payload is managed by NASA’s Goddard Space Flight Center in Greenbelt, Maryland. Partners include the International Space Station program office at NASA’s Johnson Space Center in Houston and the Massachusetts Institute of Technology Lincoln Laboratory in Lexington, Massachusetts.
For more information: https://nasa.gov/scan

Posted on

NASA’s Deep Space Optical Comm Demo Sends, Receives First Data

Source: NASA

DSOC, an experiment that could transform how spacecraft communicate, has achieved ‘first light,’ sending data via laser to and from far beyond the Moon for the first time.
NASA’s Deep Space Optical Communications (DSOC) experiment has beamed a near-infrared laser encoded with test data fromnearly 10 million miles (16 million kilometers) away – about 40 times farther than the Moon is from Earth – to the Hale Telescope at Caltech’s Palomar Observatory in San Diego County, California. This is the farthest-ever demonstration of optical communications.
Riding aboard the recently launched Psyche spacecraft, DSOC is configured to send high-bandwidth test data to Earth during its two-year technology demonstration as Psyche travels to the main asteroid belt between Mars and Jupiter. NASA’s Jet Propulsion Laboratory in Southern California manages both DSOC and Psyche.
The tech demo achieved “first light” in the early hours of Nov. 14 after its flight laser transceiver – a cutting-edge instrument aboard Psyche capable of sending and receiving near-infrared signals – locked onto a powerful uplink laser beacon transmitted from the Optical Communications Telescope Laboratory at JPL’s Table Mountain Facility near Wrightwood, California. The uplink beacon helped the transceiver aim its downlink laser back to Palomar (which is 100 miles, or 130 kilometers, south of Table Mountain) while automated systems on the transceiver and ground stations fine-tuned its pointing.
[embedded content]
Learn more about how DSOC will be used to test high-bandwidth data transmission beyond the Moon for the first time – and how it could transform deep space exploration. Credit: NASA/JPL-Caltech/ASU“Achieving first light is one of many critical DSOC milestones in the coming months, paving the way toward higher-data-rate communications capable of sending scientific information, high-definition imagery, and streaming video in support of humanity’s next giant leap: sending humans to Mars,” said Trudy Kortes, director of Technology Demonstrations at NASA Headquarters in Washington.
Test data also was sent simultaneously via the uplink and downlink lasers, a procedure known as “closing the link” that is a primary objective for the experiment. While the technology demonstration isn’t transmitting Psyche mission data, it works closely with the Psyche mission-support team to ensure DSOC operations don’t interfere with those of the spacecraft.
“Tuesday morning’stest was the first to fully incorporate the ground assets and flight transceiver, requiring the DSOC and Psyche operations teams to work in tandem,” said Meera Srinivasan, operations lead for DSOC at JPL. “It was a formidable challenge, and we have a lot more work to do, but for a short time, we were able to transmit, receive, and decode some data.”
Before this achievement, the project needed to check the boxes on several other milestones, from removing the protective cover for the flight laser transceiver to powering up the instrument. Meanwhile, the Psyche spacecraft is carrying out its own checkouts, including powering up its propulsion systems and testing instruments that will be used to study the asteroid Psyche when it arrives there in 2028.

With successful first light, the DSOC team will now work on refining the systems that control the pointing of the downlink laser aboard the transceiver. Once achieved, the project can begin its demonstration of maintaining high-bandwidth data transmission from the transceiver to Palomar at various distances from Earth. This data takes the form of bits (the smallest units of data a computer can process) encoded in the laser’s photons – quantum particles of light. After a special superconducting high-efficiency detector array detects the photons, new signal-processing techniques are used to extract the data from the single photons that arrive at the Hale Telescope.
The DSOC experiment aims to demonstrate data transmission rates 10 to 100 times greater than the state-of-the-art radio frequency systems used by spacecraft today. Both radio and near-infrared laser communications utilize electromagnetic waves to transmit data, but near-infrared light packs the data into significantly tighter waves, enabling ground stations to receive more data. This will help future human and robotic exploration missions and support higher-resolution science instruments.

“Optical communication is a boon for scientists and researchers who always want more from their space missions, and will enable human exploration of deep space,” said Dr. Jason Mitchell, director of the Advanced Communications and Navigation Technologies Division within NASA’s Space Communications and Navigation (SCaN) program. “More data means more discoveries.”
While optical communication has been demonstrated in low Earth orbit and out to the Moon, DSOC is the first test in deep space. Like using a laser pointer to track a moving dime from a mile away, aiming a laser beam over millions of miles requires extremely precise “pointing.”
The demonstration also needs to compensate for the time it takes for light to travel from the spacecraft to Earth over vast distances: At Psyche’s farthest distance from our planet, DSOC’s near-infrared photons will take about 20 minutes to travel back (they took about 50 seconds to travel from Psyche to Earth during the Nov. 14 test). In that time, both spacecraft and planet will have moved, so the uplink and downlink lasers need to adjust for the change in location. “Achieving first light is a tremendous achievement. The ground systems successfully detected the deep space laser photons from DSOC’s flight transceiver aboard Psyche,” said Abi Biswas, project technologist for DSOC at JPL. “And we were also able to send some data, meaning we were able to exchange ‘bits of light’ from and to deep space.”

DSOC is the latest in a series of optical communication demonstrations funded by NASA’s Space Technology Mission Directorate and the Space Communications and Navigation (SCaN) program within the agency’s Space Operations Mission Directorate.
The Psyche mission is led by Arizona State University. JPL is responsible for the mission’s overall management, system engineering, integration and test, and mission operations. Psyche is the 14th mission selected as part of NASA’s Discovery Program under the Science Mission Directorate, managed by the agency’s Marshall Space Flight Center in Huntsville, Alabama. NASA’s Launch Services Program, based at the agency’s Kennedy Space Center, managed the launch service. Maxar Technologies in Palo Alto, California, provided the high-power solar electric propulsion spacecraft chassis.
For more information about DSOC, visit:
https://www.jpl.nasa.gov/missions/dsoc
News Media Contact
Ian J. O’NeillJet Propulsion Laboratory, Pasadena, Calif.818-354-2649ian.j.oneill@jpl.nasa.gov
2023-171

Posted on

Volunteers Worldwide Successfully Tracked NASA’s Artemis I Mission

Source: NASA

In the year since NASA’s historic Artemis I mission successfully launched, the agency has been analyzing data from its approximately 25-day journey around the Moon and back to Earth, including data submitted from volunteers around the world as they tracked the uncrewed Orion spacecraft.
The flight test, which launched on Nov. 16, 2022, atop the agency’s powerful SLS (Space Launch System) rocket, sent the Orion spacecraft nearly 270,000 miles beyond the Moon to test the integrated rocket and spacecraft for the first time before future crewed missions.
NASA’s Space Communications and Navigation (SCaN) program selected 18 participants to attempt to passively track the Orion spacecraft. The effort helped NASA gain a better understanding of external organizations’ tracking capabilities as it seeks to augment the agency’s capabilities for tracking future missions to the Moon, Mars, and beyond.
[embedded content]
Ten volunteers successfully tracked the Orion spacecraft during Artemis I’s uncrewed flight test to and from the Moon.
The participants – ranging from international space agencies, academic institutions, commercial companies, nonprofits, and private citizens – attempted to receive Orion’s signal and use their respective ground antennas to passively track and measure changes in the radio waves transmitted by Orion. They took measurements during three phases of the mission: the spacecraft’s journey to the Moon, its orbit around the Moon, and the journey back to Earth.  

John Hudiburg
SCaN Mission Integration and Commitment Manager

“We were happy with the engagement and have spent the last few months really understanding what the data can mean for future Artemis or lunar tracking efforts,” said John Hudiburg, SCaN Mission Integration and Commitment Manager.
Data collected from the participants was provided to Flight Dynamics Facility (FDF) analysts at NASA’s Goddard Space Flight Center in Greenbelt, Maryland, for evaluation.
“The public and industry sector’s response was very exciting,” said Flight Dynamics Facility liaison Juan Crenshaw. “It shows the worldwide interest in supporting the next era of human exploration. The Flight Dynamics Facility analysts found that the data showed promising results, with many of the participants successfully tracking Orion during its journey.”

To process the data, analysts combined it with operational data from NASA’s Deep Space Network and generated standard datasets that were easier to analyze. Analysts then compared this data against the actual Artemis I tracking data collected by engineers at NASA’s Johnson Space Center in Houston. This comparison allowed analysts to identify any errors or trends in the data.  
Some of the data submitted also revealed certain challenges. These challenges included differences in the implementation of Consultative Committee for Space Data Systems (CCSDS) standards, formatting issues with the data, data quality issues. However, these challenges help NASA understand what information should be clarified for future tracking efforts.
“NASA gained an understanding of the broader community’s capabilities, the participating organizations got to show what they can do in terms of tracking, and the Flight Dynamics Facility learned how to analyze unconventional external tracking data,” said Flight Dynamics Facility Deputy Operations Director Jason Laing. “Now, we can take the lessons learned and apply them to potential tracking opportunities for future missions.”
SCaN serves as the program office for all of NASA’s space communications and navigation activities and supports the Artemis missions through both the Near Space Network and Deep Space Network. SCaN is a part of NASA’s Space Operations Mission Directorate at NASA Headquarters in Washington.
With Artemis missions, NASA is collaborating with commercial and international partners to explore the Moon for scientific discovery and technology advancement and establish the first long-term presence on the Moon. The Moon missions will serve as training for how to live and work on another world as NASA prepares for human exploration of Mars.
By Katrina Lee
NASA’s Goddard Space Flight Center, Greenbelt, Md

Posted on

NASA Improves GIANT Optical Navigation Technology for Future Missions

Source: NASA

Goddard’s GIANT optical navigation software helped guide the OSIRIS-REx mission to the Asteroid Bennu. Today its developers continue to add functionality and streamline useability for future missions.

As NASA scientists study the returned fragments of asteroid Bennu, the team that helped navigate the mission on its journey refines their technology for potential use in future robotic and crewed missions.
The optical navigation team at NASA’s Goddard Space Flight Center in Greenbelt, Maryland, served as a backup navigation resource for the OSIRIS-REx (Origins, Spectral Interpretation, Resource Identification, and Security – Regolith Explorer) mission to near-Earth asteroid Bennu. They double-checked the primary navigation team’s work and proved the viability of navigation by visual cues.

Optical navigation uses observations from cameras, lidar, or other sensors to navigate the way humans do. This cutting edge technology works by taking pictures of a target, such as Bennu, and identifying landmarks on the surface. GIANT software – that’s short for the Goddard Image Analysis and Navigation Tool – analyzes those images to provide information, such as precise distance to the target, and to develop three-dimensional maps of potential landing zones and hazards. It can also analyze a spinning object to help calculate the target’s mass and determine its center – critical details to know for a mission trying to enter an orbit.
“Onboard autonomous optical navigation is an enabling technology for current and future mission ideas and proposals,” said Andrew Liounis, lead developer for GIANT at Goddard. “It reduces the amount of data that needs to be downlinked to Earth, reducing the cost of communications for smaller missions, and allowing for more science data to be downlinked for larger missions. It also reduces the number of people required to perform orbit determination and navigation on the ground.”

During OSIRIS-REx’s orbit of Bennu, GIANT identified particles flung from the asteroid’s surface. The optical navigation team used images to calculate the particles’ movement and mass, ultimately helping determine they did not pose a significant threat to the spacecraft.
Since then, lead developer Andrew Liounis said they have refined and expanded GIANT’s backbone collection of software utilities and scripts.
New GIANT developments include an open-source version of their software released to the public, and celestial navigation for deep space travel by observing stars, the Sun, and solar system objects. They are now working on a slimmed-down package to aid in autonomous operations throughout a mission’s life cycle.
“We’re also looking to use GIANT to process some Cassini data with partners at the University of Maryland in order to study Saturn’s interactions with its moons,” Liounis said.
Other innovators like Goddard engineer Alvin Yew are adapting the software to potentially aid rovers and human explorers on the surface of the Moon or other planets.
Adaptation, Improvement
Shortly after OSIRIS-REx left Bennu, Liounis’ team released a refined, open-source version for public use. “We considered a lot of changes to make it easier for the user and a few changes to make it run more efficiently,” he said.
An intern modified their code to make use of a graphics processor for ground-based operations, boosting the image processing at the heart of GIANT’s navigation.
A simplified version called cGIANT works with Goddard’s autonomous Navigation, Guidance, and Control software package, or autoNGC in ways that can be crucial to both small and large missions, Liounis said.
Liounis and colleague Chris Gnam developed a celestial navigation capability which uses GIANT to steer a spacecraft by processing images of stars, planets, asteroids, and even the Sun. Traditional deep space navigation uses the mission’s radio signals to determine location, velocity, and distance from Earth. Reducing a mission’s reliance on NASA’s Deep Space Network frees up a valuable resource shared by many ongoing missions, Gnam said.
Next on their agenda, the team hopes to develop planning capabilities so mission controllers can develop flight trajectories and orbits within GIANT – streamlining mission design.
“On OSIRIS-REx, it would take up to three months to plan our next trajectory or orbit,” Liounis said. “Now we can reduce that to a week or so of computer processing time.”
Their innovations have earned the team continuous support from Goddard’s Internal Research and Development program, individual missions, and NASA’s Space Communications and Navigation program.
“As mission concepts become more advanced,” Liounis said, “optical navigation will continue to become a necessary component of the navigation toolbox.”
By Karl B. Hille
NASA’s Goddard Space Flight Center in Greenbelt, Md.